SX 2001 / Scannex Anti-Newton-Spray
The Product: Graphic Arts Scanner Mounting Spray for transparencies and reflective artwork, c-prints. Recommended for enlargements of up to 400 %. Immediately eliminates any newton ring effects and grain formation. SX Scannex is a petroleum and resin based aerosol. Propellent: Propane, Butane, NON-FLUOROCARBON. It is non-toxic, non-carcinogenic, however, highly flammable. Compliance to OSHA Standards, EPA approved.
The Application: Shake well before applying. Either spray evenly and directly to contact side of transparency from a distance of 15" to 20" - use little - apply just a fine mist, or better yet, spray SX Scannex in the air and pull transparency or c-print through the misty air. Let it dry for approx. 2 minutes and proceed to scan as and mount the film on the scanner bed or drum as usual. After usage, turn can up-side down and clear the inside tube, hence preventing nozzle clogging with resin particles. All residue of SX Scannex can easily be removed with a few drops of DRL Transparency-Cleaner. Sale units: Single sale or 12 x 250ml per Box